Tag: Winter

New Year’s Resolutions for your HVAC

As we enter the new year, people across the world are committing to new resolutions in an effort to make changes and improve their situations. People aren’t the only ones who could use some New Year’s spirit, as HVAC systems around the country could benefit from some resolutions and changes to their maintenance. Here are just a few New Year’s resolutions you can plan for your HVAC system that will help improve the health and efficiency of your home!

  • Change your air filters regularly. This resolution is simple yet incredibly important, as clean filters are essential to the proper operation of your HVAC system. Air filters help keep dust, dirt, allergens, and other particles out of your air system, which keeps you breathing easy and your system running longer. Some systems have different recommendations for filter changing schedules, but in general you should replace your air filters every 1-3 months depending on system usage.
  • Schedule routine maintenance checks. It never hurts to be prepared, and having a maintenance schedule planned out ahead of time ensures your system stays up and running with as few surprises as possible. When you schedule maintenance and checkups ahead of time, you not only eliminate having to book something last minute, you also avoid a large majority of crises that could have been caught before they became an issue. Contact Air Handlers to build a maintenance and checkup plan so we can take care of your system for you!
  • Upgrade your thermostat. If you are still running a manual thermostat, consider upgrading to a programmable one this year. Not only will this help lower your utility bill, but it’ll also keep your system running longer. Most manual thermostats keep the heating and cooling systems running far longer than needed, and they can easily be forgotten about or left on unnecessarily. A programmable thermostat allows you to automate the temperature control of your home, particularly by setting a temperature schedule so your heating/cooling system isn’t running at full blast all night long.
  • Clean your air ducts. It’s not uncommon for air ducts to become dirty, or even damaged, over the course of a year. When dust and dirt settles in your air ducts, that same debris is blown throughout your home every time you turn your system on. Most of this material completely bypasses the filters because it’s settled after the heating and cooling system, not before, and thus allergens and air pollutants can negatively affect the air quality in your home. You don’t have to clean your ducts every year, once every 3-5 years is usually sufficient. Just keep in mind that dirty ducts mean dirty air, so it’s best to be cautious and keep them clean.

At Air Handlers, we’re committed to keeping your air clean and comfortable. Contact us with any of your HVAC needs, and we wish you a fantastic new year!

Ready for Warmer Weather?

Spring is here (technically, despite what the weather has decided to do of late). Still, warmer weather will be here sooner than later so now is a good time to make sure you’re ready for it! Many homeowners jump into action with some spring cleaning. In 2020, more than three-quarters (78 percent) of households did a little tidying up, according to the American Cleaning Institute. Homeowners prioritized the bedrooms, closets, and kitchens, eliminating dirt, odors, or asthma and allergy triggers like mold and dust.

From deep cleaning to a quick spruce-up, you can take some steps now to welcome the return of warm weather and prepare your home for rising temperatures. Here are a few ways to get your home back in shape well in advance of the season’s first heatwave.   

1. Inspect Your Weather Stripping

Winter can take a toll on your house. Look for any post-winter gaps in the weather stripping around your doors and tighten any hinges that may have loosened in the shifting temperatures.

2. Gear Up For Time Outdoors

As the weather warms up, homeowners often head outside to enjoy the pleasant temperatures. If a backyard cookout is calling your name, make sure your grill is in good working order and positioned at least 10 to 15 feet away from your home. Check your deck, patio, and porch for anything that may have been damaged over the winter. Before your kids join the fun, check to make sure treehouses, trampolines, and playsets are stable.

3. Address Your Attic

Take some time before the weather heats up to inspect your attic. Look for signs of animals that may have found their way in and seal any holes. Check your insulation for any wet spots, which may indicate a leak, and consider adding additional insulation for the warmer season ahead.

4. Get Your Cooling System Ready

When temperatures begin to rise, an efficient AC system is crucial to maintaining a comfortable home environment with good indoor air quality. Pair your system with a smart thermostat like the iComfort® S30 to monitor the air quality and pollen levels in your area. Be sure to check your system’s vents inside and outside for any blockages and test it to make sure it’s working properly. Now’s also a good time for preventative maintenance to prepare your HVAC system for the cooling season ahead. Call Air Handlers to schedule an inspection for your system before the temperatures start climbing. 

5. Let The Sunshine In

Wash away the remnants of winter’s snow and ice by thoroughly cleaning your home’s windows. Use a multipurpose cleaner on your frame, windowsill, and hardware, and wipe clean. For a streak-free finish, use a microfiber cloth or even a newspaper. Just make sure to wash your windows on a cloudy day. Otherwise, the sun may dry your solution too soon, leaving your window with streaks.

The Spring Corner is Approaching!

Time seems to fly faster all the time. It’s almost Spring! That means that you should be making plans to perform Spring maintenance on your system.

Now, it isn’t quite to the point that we can turn off our furnaces. The evenings and nights are still fairly chilly. However, there are a few small things you can check ahead of the next weather change.

  • Check your filters – Yes, we know we hammer this one home, but it really is important. If you check/replace your filters regularly, that’s good! If not, you should at least plan to do so between seasons. This can help your system run more efficiently in any season.
  • Check for drafts – You’ve probably done this already. However, if you’re noticing that your rooms don’t always hold heat the way they once did, a good thing to do is check your windows for any drafts. The easiest way to do this is to (carefully) use a lit candle and move it around the edges of your windows. This will work best when there is some wind outside, but the flame moving means you may have a draft.
  • Clear the area – The last tip on this short list is to make sure that there is no debri surrounding your unit. With the wind and rain we get here in the Pacific Northwest, limbs and other debris can easily gather around your unit and cause problems.

Energy Saving Tips

Utility bills can be scary, especially in peak seasons. They shouldn’t be. There are things you can do, large and small, that can help you reduce your energy costs in your budget. Big things, like investing in high-efficiency heating and air conditioning equipment, are going to have the largest impacts on your monthly statements. However, these bigger changes are not the only way you can save. Some smaller adjustments don’t require any expense on your part.

Here are some smaller things you can do to help lower/control your monthly expenses. Some of these we’ve probably told you about before (possibly more than once), but they’re all good practices!

  • Turn off the lights when you aren’t in a room.
  • Lower or raise the temperature your thermostat is set at (depending on the season).
  • Keep all your vents and registers open.
  • Keep the windows and doors of your home closed.
  • Change your furnace filter.
  • Switch to high-efficiency light bulbs.
  • Operate your ceiling fans correctly for the best distribution of air – clockwise during the winter and counter-clockwise during the summer.
  • Seal your windows and doors.
  • Set your thermostat to “AUTO” instead of “ON.”
  • Wash your clothes in cold water.
  • Take shorter showers.
  • Open or close curtains depending on the season.
  • Unplug items like televisions, kitchen appliances and more when they aren’t in use.
  • Layer up before turning up the thermostat during the winter.
  • Have a timer for your lights.
  • Take cooler showers.

Enjoy the Winter Weather in Comfort

Winter has arrived and the holidays will be wrapping up soon… not to mention that the new year is nearly here! In all this time of relaxing, celebrating with family and friends, and enjoying the warmth of your home, the last thing you need is for your furnace to quit. To prevent a situation that would leave you stressed and require expensive emergency services, we want to re-post a list of things to look out for to determine if your home furnace has a problem. We also provide some simple fixes you can try on your own for minor challenges. It should be stressed that if you suspect a major issue with your home furnace, you should get help from a qualified professional rather than going at it on your own.

Thermostat malfunctioning

Your thermostat is an integral part of the safety features of your home furnace. It shuts down the furnace when it exceeds the maximum temperature specified to conserve energy and prevent accidents. This operating temperature varies from furnace to furnace. Your thermostat may be malfunctioning if it continuously shuts down before it even reaches this specified temperature. This continuous shutdown can make your living area very uncomfortable, and a simple fix for this is to check the battery of the thermostat and replace it to get your furnace working at its optimum. The thermostat setting should also be reviewed to prevent inadequate heat production by the furnace or total shutdown.

Lack of maintenance

If you fail to maintain your furnace properly, you should not be surprised when it breaks down. To cut down costs which arise from a total breakdown, you should plan for annual tune-ups and maintenance by qualified professionals.

Faulty Filters

Filters are very essential, but often overlooked components of the furnace system. They are built to remove unwanted particles from the generated airflow. A build-up of dust and dirt over time leads to a clogged filter. During the process of dust and dirt by passing air through the vents, a clogged filter puts more pressure on the furnace. A clogged filter may even lead to a total shutdown of the furnace as the heat exchanger might stop working due to overheating caused by an over clogged filter.

If your environment generates a lot of dust and dirt, ensure that you change your filters regularly. Most furnace manufacturers specify between a month to three for a change of your filter. A filter change is essential if you have a child-friendly environment so that your air filter does not become an air pollutant.

Size issues

When your furnace does not heat enough, it may be a pointer to the fact that your furnace is the wrong size for the space provided. To solve this problem, get a professional to estimate your needs and help you determine which furnace system would be the perfect fit for the space provided. Ensure that you are guided by professional advice from picking a furnace up to its installation.

Gas

If your furnace is not starting up, a simple solution is to check the gas valve and carefully turn it o if it was turned off. If you suspect a gas leak, leave the affected area immediately and contact the fire service.

Vents and Pipes

In gas furnaces and high efficiency condensing furnaces, vents are very vital to maintain because they take emissions outside the building. Most times, these emissions are combustible, and it is essential that they are not covered to prevent fire outbreaks.

There is also the danger that the pipes leading to the vents will become clogged with ice leading to serious problems. To prevent clogging from ice, exhaust vent pipes need to be shortened. When the pipes are too long, a build-up of moisture might occur because the force pushing out the exhaust is not enough to go the length of the pipes. This makes it more likely for ice clogging when the exhaust finally reaches the outside. To prevent these problems, ensure that the outside units are clear and clean before it becomes too cold. In screening pipes and vents you should use materials that will not inhibit the flow of exhaust.

Electric ignition

Furnaces come with an igniter which automatically lights up gas when switched on. If the furnace fails to light up, the usual suspect is the ignition wire which should be inspected. If the situation persists, you should turn off the igniter and reset it. If it is an electronic igniter, it is not wise to attempt to light it manually as it is a highly complex system which should not be tampered with.

Noise

Continuous rattling, screeching and other unwanted sounds are often early indicators of a more serious mechanical or electrical problem. These noises also arise due to wear and tear and a trip to a qualified professional would get all issues cleared up.

It is essential to be proactive as a home furnace owner and to deal with issues as soon as they arise to ensure that your furnace is always in good condition

Are you ready for the snow?

Snow is coming to the South Sound. Regular maintenance is important for the proper care of your HVAC system. As always, major furnace maintenance should be handled by a licensed HVAC technician. But there are some steps you can take on your own that can result in a more comfortable winter:

Power down

Turn off all power to the unit before performing any maintenance; wait for the blower to stop.

Replace filters

Replace air filters at least once every three months. Dirty filters can cause your system to work harder, resulting in lower efficiency.

Run a sound check

Turn your unit on, and check for unusual sounds, like banging or rattling.

Look for signs of moisture

Check for moisture on windows, or rust or dirt accumulations on the vent pipe. This can indicate improper operation.

Assess the room temperature

Check your thermostat’s temperature while the unit is on to ensure rooms are reaching their full comfort potential.

If, during your basic checklist rundown you discover any unusual noises, excess moisture, or other signs your unit is not functioning properly, call Air Handlers to schedule an appointment.

HVAC at Christmas

With 2020 coming to a close, it feels like now is the time to relax a bit and enjoy the holiday (safely, of course). Some people have noticed an uptick in their winter allergy symptoms, though. The reason may be a simple one: your Christmas tree.

Whether you opt for getting a live tree or are pulling an artificial one from storage, there are some things you should be aware of. Live trees are often in the elements, causing mold spores to have an opportunity to land on them, along with dust and any other pollens. These allergens can cause respiratory issues to worsen. Artificial trees not stored properly can have mold and mildew issues, as well.

What should you do? Well, one thing to do, especially with live trees, is to spray them down and then blow dry them before bringing them inside. This will usually get most of these irritants off the tree. You should also make sure the ornaments you use have been stored in a good place (as the issues with artificial trees can be seen in ornaments, as well).

On top of that, make sure your HVAC system is up to date and working efficiently. Check your filters, if you haven’t done so already. Of course, keep Air Handlers in mind for your HVAC maintenance needs!

Fall Weather Tips

The weather has changed and it’s obvious. It almost seems like we went from decently cool to needing our heaters with a snap of someone’s fingers! As always, make sure you have your system checked and that you’re good to go for the rest of the season (and call Air Handlers if you notice problems).

While your heater can help keep your home warm, you may be wondering about what you can do to make sure that your heater doesn’t work overtime. If so, here are a few simple tips we have to help your system work smarter, not harder.

Curtains, curtains, curtains: While it seems simple, this is easy to forget or overlook. When the sun is out and shining, open the curtains facing the sun so that some natural heat will be pulled into the house. Of course, closing the curtains on cloudy days or after dark will act as an extra bit of insulation to keep some warmth inside.

Maximize the flow: Make sure that warm air from your vents can move as freely as possible. For instance, you may want to sit close to a vent for that warm air to hit you, but it is better to move your chair or couch so that the air can go as far as possible to more efficiently heat your home.

Block the cracks: While things like making sure windows are properly sealed are standard knowledge, you should consider blocking the spaces around your doors, too.

Fall Comfort Time!

Fall is here! That means pumpkins, color changes in nature, and cool weather. If you haven’t already completed your maintenance check for the colder days to come, it should definitely be something you do.

We have some other tips for staying warm and increasing your energy efficiency:

BLOCK THE BREEZE:
A cool breeze can drop the temperature of a place by 30%. Use a sealant to cover up cracks, and block crevices on doors and windows to prevent the cold breeze from coming in. It will also help to avoid heat from escaping your home.

INSULATE:
Insulating walls and the ceiling using Building Insulation Materials is the best way to trap heat inside. Since hot air rises, ceilings should be properly insulated to make sure it doesn’t get absorbed by the cold temperature outside. Heat lasts for more than 14 hours in an overly insulated room, whereas, it’s 8 hours in an average room with concrete walls.

SITTING BY CANDLELIGHT:
Add ambiance to your home with candlelight. It’s a cheap yet great source of heat. Cooking is another way to warm the air in your home.

LET THE SUN:
Sunlight is one of the greatest sources of heat and light energy. You get most of it during the day. Open your curtains or blinds and allow the warmth of the sun to heat your home. Remove any obstacles that block your windows such as plants or any other items.

REDECORATE YOUR HOME WITH RUGS AND CARPETS!
Cold air is heavier than warm air, thus sinking to the bottom. That is why concrete or porcelain floors are cold to walk on. Adding rugs and carpets act as insulation and prevent heat loss from the floor.

Having Furnace Problems?

Winter has arrived and the holidays are starting to wrap up… not to mention that the new year is nearly here! In all this time of relaxing after the holidays and enjoying the warmth of your home, the last thing you need is for your furnace to quit. To prevent a situation that would leave you stressed and require expensive emergency services, we want to re-post a list of things to look out for to determine if your home furnace has a problem. We also provide some simple fixes you can try on your own for minor challenges. It should be stressed that if you suspect a major issue with your home furnace, you should get help from a qualified professional rather than going at it on your own.

Thermostat malfunctioning
Your thermostat is an integral part of the safety features of your home furnace. It shuts down the furnace when it exceeds the maximum temperature specified to conserve energy and prevent accidents. This operating temperature varies from furnace to furnace. Your thermostat may be malfunctioning if it continuously shuts down before it even reaches this specified temperature. This continuous shutdown can make your living area very uncomfortable, and a simple fix for this is to check the battery of the thermostat and replace it to get your furnace working at its optimum. The thermostat setting should also be reviewed to prevent inadequate heat production by the furnace or total shutdown.
Lack of maintenance
If you fail to maintain your furnace properly, you should not be surprised when it breaks down. To cut down costs which arise from a total breakdown, you should plan for annual tune-ups and maintenance by qualified professionals.

Faulty Filters
Filters are very essential, but often overlooked components of the furnace system. They are built to remove unwanted particles from the generated airflow. A build-up of dust and dirt over time leads to a clogged filter. During the process of dust and dirt by passing air through the vents, a clogged filter puts more pressure on the furnace. A clogged filter may even lead to a total shutdown of the furnace as the heat exchanger might stop working due to overheating caused by an over clogged filter.
If your environment generates a lot of dust and dirt, ensure that you change your filters regularly. Most furnace manufacturers specify between a month to three for a change of your filter. A filter change is essential if you have a child-friendly environment so that your air filter does not become an air pollutant.

Size issues
When your furnace does not heat enough, it may be a pointer to the fact that your furnace is the wrong size for the space provided. To solve this problem, get a professional to estimate your needs and help you determine which furnace system would be the perfect fit for the space provided. Ensure that you are guided by professional advice from picking a furnace up to its installation.

Gas
If your furnace is not starting up, a simple solution is to check the gas valve and carefully turn it o if it was turned off. If you suspect a gas leak, leave the affected area immediately and contact the fire service.

Vents and Pipes
In gas furnaces and high efficiency condensing furnaces, vents are very vital to maintain because they take emissions outside the building. Most times, these emissions are combustible, and it is essential that they are not covered to prevent fire outbreaks.
There is also the danger that the pipes leading to the vents will become clogged with ice leading to serious problems. To prevent clogging from ice, exhaust vent pipes need to be shortened. When the pipes are too long, a build-up of moisture might occur because the force pushing out the exhaust is not enough to go the length of the pipes. This makes it more likely for ice clogging when the exhaust finally reaches the outside.
To prevent these problems, ensure that the outside units are clear and clean before it becomes too cold. In screening pipes and vents you should use materials that will not inhibit the flow of exhaust.

Electric ignition
Furnaces come with an igniter which automatically lights up gas when switched on. If the furnace fails to light up, the usual suspect is the ignition wire which should be inspected. If the situation persists, you should turn off the igniter and reset it. If it is an electronic igniter, it is not wise to attempt to light it manually as it is a highly complex system which should not be tampered with.

Noise
Continuous rattling, screeching and other unwanted sounds are often early indicators of a more serious mechanical or electrical problem. These noises also arise due to wear and tear and a trip to a qualified professional would get all issues cleared up.
It is essential to be proactive as a home furnace owner and to deal with issues as soon as they arise to ensure that your furnace is always in good condition